## Saturday, December 28, 2013

### EML2 plane change

Most of my models use circular coplanar orbits. But Jon Goff points out many asteroids have a healthy inclination. Departing for an asteroid from the moon's orbital plane often involves a big plane change. And plane changes can be expensive (see comments in What about Mr. Oberth?)

But easy plane changes is a big reason I love EML2. This takes some explaining.

Let's look at a 60 degree plane change but no change in speed. I pick 60º because it's easy-- the original and new velocity vector as well as the delta V vector are all sides of an equilateral triangle.

If your speed is about 8 km/s (as in low earth orbit), a 60 degree plane change costs about 8 km/s.

With higher orbits, plane changes are cheaper. At GEO (about 36,000 km above earth's surface), orbit speed is about 3 km/s and a 60 degree plane change costs 3 km/s.

EML2 is about 63,000 kilometers above the moon's surface. It's moving about .17 km/s with regard to the moon. So a 60 degree plane change at EML2 costs .17 km/s:

But wait, it gets even better!

My favorite route from LEO to EML2 is the one found by Robert Farquhar:

The orbit is time reversible. A .15 km/s braking burn at EML2 cuts speed with regard to the moon to .02 km/s. The allows the ship to fall deep into the moon's gravity well. With the a little Oberth help at perilune, another .18 km/s suffices to send the ship to an 182 km perigee.

Here's a single burn at EML2 that cuts speed to .02 km/s as well as doing a 60 degree plane change:

The .16 km/s braking/plane change burn is only .01 km/s more than the .15 km/s coplanar burn Farquhar calls for.

Where else can you get a 60º plane change for only .01 km/s?

EML2 has a tiny C3 with regard to both the moon and earth. This confers a big Oberth advantage. And the easy plane change is icing on the cake.

Edit: Isaac Kuo has pointed out that earth has a 30 km/s vector coplanar to the ecliptic plane. A hyperbolic orbit departing earth might have a v infinity of 3 or 4 km/s. When you add a 3 or 4 km/s vector tilted 60 degrees to the 30 km/s vector, you are only inclined 4 or 5 degrees from the ecliptic plane. Still, this is a substantial plane change! This post is incomplete as I've only looked at departure from EML2. Hopefully, I'll soon have time to look at burns at perilune and perigee burns and the possible trans asteroid orbits.

George Turner said...

A 60 degree plane change for 0.01 km/sec is truly amazing, but that also points up that the burn requires extreme precision, because if it is off by just 10 meters/second, you could potentially end up 60 degrees out of plane! It might be interesting to see how sensitive the final trajectory is to slight guidance errors on that one.

Hollister David said...

George, I believe you are correct. Playing with my 3 and 4 body models, I notice just a slight change in departure from L1 or L2 can make a huge difference in final orbit.

Instead of nice predictable conic sections (as in 2 body mechanics) n-body paths are chaotic, especially around L1 and L2. I think there's sort of a butterfly wing effect.

That said, I believe the need for precision can be mitigated by correction maneuvers enroute. If I remember right, the Chinese team had correction maneuvers in their delta V budget when Chang-e 2 departed the sun-earth L2 for Toutatis.

Jon Goff said...

Hop,
I'm not sure this entirely solves the problem. You can do a cheap plane change--about the line of apsides between the earth and the moon. But that only doesn't change the line of apsides any--your perigee is hard to shift very much when coming back from EML-2, and if your perigee isn't on the locus of periapses for the hyperbolic departure asymptote, you may not be able to get onto the departure trajectory you need.

I *think* I know some ways to deal with all of this, but I'm not 100% sure that you can get to all departure declinations from an EML-2 starting position.

~Jon

Hollister David said...

John, you mention that you might know some ways to deal with the issues you bring up. Hope you share those soon.

After dropping from EML2, there are two major burns. A near perilune burn that drops the ship to a deep perigee. Then a perigee burn for trans asteroid injection. I plan to expand this post for closer looks at the perilune and perigee burns. I believe your observations would be helpful.

Doug Plata said...

Could propellant (or better yet, propulsion service) be delivered from a lunar polar ice harvesting operation to any LEO inclination in a just-in-time manner (i.e. the OTV arrives at the right orbit just before someone launches the GEO comm sat to LEO)?

Thomas Lee Elifritz said...

If you just want to land on the pole of the moon you can indeed do Jon's line of apsides plane change early on and shoot for a flyby, near where the pole of the moon will be in a few days hence. You just have to compensate for the moon's gravity once you get within its sphere of influence, which is highly dependent on velocity (orbital eccentricity). I haven't actually done the calculations yet but it would be interesting to see how this compares energy wise to simply launching into a polar orbit from Earth, where all you give up is the boost from Earth's rotation. If you do your plane change early (like during launch) your energy hit will be quite low.

Hollister David said...

Doug, Over 27 days (moon's sidereal period) EML2 moves 360 degrees. For reaching a specific orbit, it seems to me launch should be made when that orbital plane intersects the moon's orbital plane. So I believe there'd be launch opportunities each two weeks or so.

Hollister David said...

Thomas,

Lunar poles could be reached by a polar orbit, as you say.

I looked at another route at http://hopsblog-hop.blogspot.com/2013/08/lunar-ice-vs-neo-ice.html

There are those who believe reaching the lunar poles takes too much delta V. As you mention it doesn't have to take a lot of delta V.

Doug Plata said...

David, I'd like to pose some challenges for you to consider handling in the form of blog posts. How can I send you those challenges?

dougspace007 - gmail.

Hollister David said...

Doug, munging my email to thwart spambots:

hop forty-one forty-three at gmail dot com

No spaces, numbers not spelled out, etc.